Skip to content Skip to navigation

Angle Valve - PV25PKA - Dual Microswitch BSPP 1/8" G, C41317000

Part Number: C41317000
GBP 609.00

0 In Stock

Click For Availability Typical lead time 2 week(s)

Variant

Explore the range of variants given below to compare the product

Short Description Part Number Connection Inlet Flange Material Body
C41111000 DN 10 ISO-KF (NW10) Aluminum
C41113000 DN 10 ISO-KF (NW10) Aluminum
C41211000 DN 16 ISO-KF (NW16) Aluminum
C41213000 DN 16 ISO-KF (NW16) Aluminum
C41215000 DN 16 ISO-KF (NW16) Stainless Steel 1.4404 / 316 L / X2 CrNiMo 17 13 2
C41311000 DN 25 ISO-KF (NW25) Aluminum
C41313000 DN 25 ISO-KF (NW25) Aluminum
C41315000 DN 25 ISO-KF (NW25) Stainless Steel 1.4301 / 304 / X5 CrNi 18 10
C41317000 Aluminum -
C41318000 Aluminum -
C41411000 DN 40 ISO-KF (NW40) Aluminum
C41413000 DN 40 ISO-KF (NW40) Aluminum
C41415000 DN 40 ISO-KF (NW40) Stainless Steel 1.4301 / 304 / X5 CrNi 18 10
C41417000 Aluminum -
C41510000 DN 50 ISO-KF (NW50) Aluminum
C41510100 Aluminum -
C41515000 DN 50 ISO-KF (NW50) Stainless Steel 1.4301 / 304 / X5 CrNi 18 10

PVPK ISO-KF - Rt Angle Isolation Valve

The Edwards PVPK valves are fast acting, pneumatically operated right-angled isolation valves featuring bellows and O-ring sealing to provide a grease free vacuum. With visual and electrical indication of valve status and an option of aluminum or stainless steel construction, they provide a low cost valve which is ideal for high cycling duties.

Features and Benefits

  • Improved lifetime, mean‑time-to-failure now 5,000,000 cycles
  • Electrical and visual indication of valve status
  • Available in aluminium or stainless steel
  • Choice of bellows or O-ring shaft sealing with aluminium bodies

Material of Construction

Material Body Aluminum
Material Seal FKM

General Product Information

Leak Rate 1.000 × 10⁻⁷
IP Rating IP67
Dimension Comments The dimensions length, width and height try to describe the outer shape of this particular product in its typical orientation when standing on the ground. For valves in particular we recommend checking the detailed dimensions given in 2D drawings in the instruction manual or the 3D shapes given in 3D models.